Liquid: | ||
Pumped liquid: | Any Newtonian liquid | |
Maximum liquid temperature: | 40 °C | |
Density: | 998.2 kg/m³ | |
Technical: | ||
Type of impeller: | VORTEX | |
Maximum particle size: | 35 mm | |
Materials: | ||
Pump housing: | Stainless steel | |
DIN W.-Nr. 1.4301 | ||
AISI 304 | ||
Impeller: | Stainless steel | |
DIN W.-Nr. 1.4301 |
AISI 304 | ||
Installation: | ||
Pump outlet: | R 2" | |
Maximum installation depth: | 2 m | |
Auto-coupling: | Y | |
Electrical data: | ||
Type of motor: | PSC | |
Power input - P1: | 1.25 kW | |
Mains frequency: | 50 Hz | |
Rated voltage: | 1 x 230 V | |
Rated current: | 5.44 A | |
Cos phi - power factor: | 0.98 | |
Rated speed: | 2795 rpm | |
Capacitor size - run: | 16 µF/400 V | |
Enclosure class (IEC 34-5): | IP68 | |
Insulation class (IEC 85): | F | |
Length of cable: | 5 m | |
Type of cable plug: | SCHUKO | |
Others: | ||
Net weight: | 11 kg | |
Gross weight: | 12 kg | |
Danish VVS No.: | 391270332 | |
Swedish RSK No.: | 5885934 | |
Finnish LVI No.: | 4822555 | |
Norwegian NRF no.: | 9045691 |
Unilift AP35B.50.08.A1.V
Submersible effluent pump
Vertical single-stage stainless steel submersible pump with integrated submersible 1-phase motor.
The pump is fitted with ring stand and carrying handle and is supplied with a 5 m mains cable and a level switch for automatic start and stop.
The impeller is a VORTEX impeller for 35 mm free passage suitable for pumping surface water, groundwater, wastewater and similar.
The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.
The motor is insulation class F with thermal overload protection and has long-life deep-groove greased-for-life ball bearings.
The pump has R 2" discharge port and is ready for installation either free-standing or on an auto-coupling system.
No review found.
Please Login to post review.