Unilift AP50B.50.11.A1.V

SKU: Unilift AP50B.50.11.A1.V
RM 0.00
Loading ...
Share:
Liquid:
Pumped liquid:    Any Newtonian liquid
Maximum liquid temperature:    40 °C
Density:    998.2 kg/m³
 
Technical:
Type of impeller:    VORTEX
Maximum particle size:    50 mm
 
Materials:
Pump housing:    Stainless steel
     DIN W.-Nr. 1.4301
     AISI 304
Impeller:    Stainless steel
     DIN W.-Nr. 1.4301
     AISI 304
 
Installation:
Pump outlet:    R 2"
Maximum installation depth:    2 m
Auto-coupling:    Y
 
Electrical data:
Type of motor:    PSC
Power input - P1:    1.75 kW
Mains frequency:    50 Hz
Rated voltage:    1 x 230 V
Rated current:    8 A
Cos phi - power factor:    0.95
Rated speed:    2760 rpm
Capacitor size - run:    20 µF/400 V
Enclosure class (IEC 34-5):    IP68
Insulation class (IEC 85):    F
Length of cable:    5 m
Type of cable plug:    SCHUKO
 
Others:
Net weight:    10.5 kg
Gross weight:    11.5 kg
Danish VVS No.:    391272332
Swedish RSK No.:    5885938
Norwegian NRF no.:    9045692

Unilift AP50B.50.11.A1.V
Submersible effluent pump

Vertical single-stage stainless steel submersible pump with integrated submersible 1-phase motor.

The pump is fitted with ring stand and carrying handle and is supplied with a 5 m mains cable and a level switch for automatic start and stop.

The impeller is a VORTEX impeller for 50 mm free passage suitable for pumping surface water, groundwater, wastewater and similar.

The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.

The motor is insulation class F with thermal overload protection and has long-life deep-groove greased-for-life ball bearings.

The pump has R 2" discharge port and is ready for installation either free-standing or on an auto-coupling system.

 

No review found.

Please Login to post review.

You May Also Like