Unilift AP12.40.08.1

SKU: Unilift AP12.40.08.1
RM 0.00
Loading ...
Share:
Liquid:
Pumped liquid:    Any Newtonian liquid
Liquid temperature range:    0 .. 55 °C
Density:    998.2 kg/m³
 
Technical:
Type of impeller:    SEMI OPEN
Maximum particle size:    12 mm
 
Materials:
Pump housing:    Stainless steel
     DIN W.-Nr. 1.4301
     AISI 304
Impeller:    Stainless steel
     DIN W.-Nr. 1.4301
     AISI 304
 
Installation:
Pump outlet:    Rp 1 1/2
Maximum installation depth:    7 m
 
Electrical data:
Type of motor:    PSC
Power input - P1:    1.3 kW
Mains frequency:    50 Hz
Rated voltage:    1 x 230 V
Rated current:    5.9 A
Cos phi - power factor:    0.99
Rated speed:    2780 rpm
Capacitor size - run:    16 µF/400 V
Enclosure class (IEC 34-5):    IP68
Insulation class (IEC 85):    F
Length of cable:    10 m
Type of cable plug:    SCHUKO
 
Others:
Net weight:    12.5 kg
Gross weight:    13.5 kg
Danish VVS No.:    391313131
Swedish RSK No.:    5885778
Finnish LVI No.:    4822532
Norwegian NRF no.:    9045613

Unilift AP12.40.08.1
Submersible drainage pump type

Vertical single-stage stainless steel submersible pump with vertical discharge port and integrated submersible 1-phase totally enclosed motor in insulation class F with thermal overload protection. The pump is fitted with a suction strainer.

The impeller is a SEMI OPEN impeller for 12 mm free passage suitable for pumping groundwater, surface water, rain water and similar.

The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.

The pump has a riser pipe, a cooling jacket for continuous cooling of the motor by the pumped liquid and long-life deep-groove greased-for-life ball bearings.

The pump is ready for use as it is fitted with carrying handle and is supplied with a 10 m mains cable. The mains cable is of the plug type with glass sealing compound in the socket to prevent penetration of humidity into the stator windings.

 

No review found.

Please Login to post review.

You May Also Like